SET SPANTREE PATH_COST_PORT2
Use the SET SPANTREE PATH_COST_PORT2 command to change the path cost of port 2 on the local Bridge Module.
Format
SET SPANTREE PATH_COST_PORT2 {variable}
Parameters
{variable} = 1 - 65535 (default is 10)
Example
OEBM> set spantree path_cost_port2 36 [ENTER]
Spanning tree parameter changed
Description
The SET SPANTREE PATH_COST_PORT2 command enables you to change the path cost of port 2 on the local Bridge Module.
The Spanning Tree Protocol seeks to minimize the path cost between each bridge and the Root Bridge (called the root path cost). The “root path cost” represents the distance between this bridge and the root bridge, and should be a lower value as the distance is lessened.
Modifying the value for the port 2 path cost at the local bridge may cause bridges “beneath” the local bridge in the Spanning Tree to change their path to the root bridge depending on the benefit or drawback of going through the local bridge.
Changing values may also result in a port currently in Blocking state on the local bridge to transition into Forwarding state and vice versa if the cost associated with the once Blocking port is now lower.
4 - 74 ONline Ethernet Bridge Module Installation and Operation Guide
