SET TERMINAL PROMPT
Use the SET TERMINAL PROMPT command to customize the management prompt that displays on your terminal when connected to a local Bridge Module.
Format
SET TERMINAL PROMPT {prompt}
Parameters
{prompt} = terminal prompt up to 15 characters
Example
This example changes the terminal prompt to OEBM3>.
OEBM> set terminal prompt OEBM3> | [ENTER] |
Terminal parameter changed
Description
The SET TERMINAL PROMPT command enables you to customize the management prompt that displays on your terminal when connected to a local Bridge Module.
This command allows you to customize your management prompt with a string of up to 15 characters in length. You must include all the characters in the new prompt, including the angle bracket (>) if desired.
Note: 3Com recommends that you make the terminal prompt and the device name the same for your particular Bridge Module. In this manner, if you are remotely connected to this bridge, the prompt will help to indicate that there is a remote connection established.
