SET TERMINAL DATA_BITS
Use the SET TERMINAL DATA_BITS command to set the number of data bits used by your terminal.
Format
SET TERMINAL DATA_BITS {data bits}
Parameters
{data bits} = 7
8 (default)
Example
This example changes the data bits to 7.
OEBM> set terminal data_bits 7 | [ENTER] |
Terminal parameter changed
Description
The SET TERMINAL DATA_BITS command enables you to set the number of data bits used by your terminal.
Note that if your terminal or modem and the Bridge Module do not have the same data bit setting you will not be able to log in.
The procedure to change the baud rate can also be used to modify terminal data bits.
4 - 78 ONline Ethernet Bridge Module Installation and Operation Guide
