SET DEVICE DEFAULT_GATEWAY_PORT1
Use the SET DEVICE DEFAULT_GATEWAY_PORT1 command to set the IP address of the gateway that should be used when port 1 on the Bridge Module does not recognize the receiver address on the local network.
Format
SET DEVICE DEFAULT_GATEWAY_PORT1 {IP address}
Parameter
{IP address} = n.n.n.n
Example
OEBM> set device default_gateway_port1 1.2.3.4 [ENTER]
Description
The SET DEVICE DEFAULT_GATEWAY_PORT1 command enables you to set the IP address of the gateway that should be used when port 1 on the Bridge Module does not recognize the receiver address on the local network.
4 - 46 ONline Ethernet Bridge Module Installation and Operation Guide
