SHOW DEVICE
Use the SHOW DEVICE command to display
Format
SHOW DEVICE
Parameters
none
Example
OEBM> show device [ENTER]
ONline Ethernet Bridge Module (Bridge Module); SNMP
Management
Name: Bridge3
Boot EPROM Version:v1.3 | Serial#:3658 | Restarts:9 | |||
Flash EPROM | Version: v2.00 | Service Date: / / | |||
Location: |
|
|
|
|
|
Third Floor | Engineering |
|
|
| |
|
| Port 1 |
| Port 2 |
|
MAC Address: |
| ||||
IP Address: |
| 127.1.2.3 |
| 127.1.2.3 | |
Subnet Mask |
| FF.FF.FF.00 | FF.FF.FF.00 | ||
Default Gateway | 0.0.0.0 |
| 0.0.0.0 |
For assistance contact: Network Administrator
Diagnostics: ENABLED
SQE_Mode: NORMAL
Description
The SHOW DEVICE command displays the firmware version of the Bridge Module and other device related information.