SET SPANTREE MODE
Use the SET SPANTREE MODE command to enable or disable the Spanning Tree Algorithm and Protocol (STAP).
Format
SET SPANTREE MODE {setting}
Parameters
{setting} = disable enable (default)
Example
OEBM> set spantree mode disable [ENTER]
Spanning tree parameter changed
Description
The SET SPANTREE MODE command allows you to enable or disable the Spanning Tree Algorithm and Protocol (STAP).
3Com recommends that for stable fault tolerant network topologies, the Spanning Tree mode remain enabled.
4 - 72 ONline Ethernet Bridge Module Installation and Operation Guide
