3Com 5102B-EE installation and operation guide Logging Out, Clear

The MONITOR command will, by default, monitor the bridge statistics and use a time value of 5 minutes if you press [ENTER] instead of inputting a time and an option in the command line.

Note that when executing the MONITOR command, bridging performance will be affected for the duration of the command. To minimize this impact, use the default value.

CLEAR

The CLEAR command resets statistics and fatal-error registers associated with the SHOW and MONITOR commands to zero. The CLEAR command has four parameters: community, counter, filter, and last_error. The community, counter, and filter parameters also have parameters of their own.

Logging Out

When you are done using the Bridge Module, SAVE all your changes and then log out to prevent unauthorized use of the module. You log out of the system using the LOGOUT command as shown below. If you have not made any unsaved changes prior to issuing this command, you will be logged out of the system and the following message will display:

OEBM> logout [ENTER]

Bye

Management Functions 3 - 23