3Com 5102B-EE installation and operation guide Show Spantree, Parameters none Example

SHOW SPANTREE

Use the SHOW SPANTREE command to display the current Spanning Tree information for the local bridge.

Note that the values listed for forward_delay_time, hello_time, and listen_time are active and in effect ONLY when the local bridge is the root of the Spanning Tree.

Format

SHOW SPANTREE

Parameters none

Example

OEBM> show spantree	[ENTER]
Spanning Tree Parameters:
Mode		enabled
Bridge Priority		125
Path Cost Port 1		10
Path Cost Port 2		10
Hello Time (sec)		10
Forward Delay Time (sec)		12
Listen Time (sec)		22
Spantree Hello Address:		01-70-C2-00-00-00

Description

The SHOW SPANTREE command displays current Spanning Tree configuration information.

These parameters are described in detail in the SET SPANTREE section.

Note that the values listed for forward_delay_time, hello_time, and listen_time are active and in effect ONLY when the local bridge is the root of the Spanning Tree. Otherwise, the local bridge, as a non-root bridge, will operate using the values imposed for these parameters by the current Root Bridge.

Management Commands 4 - 109