Just pull the extractor lever down to remove the module from the concentrator.
Table 2-1. Bridge Module LEDs, Button, and Connectors
Label | Function |
|
|
RX | Indicates receive activity on the IEEE 802.3 or Ethernet |
| network connected to that port. |
|
|
TX | Indicates transmit activity on the IEEE 802.3 or |
| Ethernet network connected to that port. |
|
|
FWD | Indicates that the bridge is in forwarding state and is |
| sending packets from that port. |
|
|
MGMT | Indicates that administrator mode of the bridge is |
| currently active. |
|
|
TEST | Indicates Bridge Module |
|
|
RESET | Press this button to reset the Bridge Module. Same as |
| issuing the RESET command or plugging in the |
| module. |
|
|
AUI | Female AUI connector for |
| connection. |
|
|
PORT | PC or modem for Management Interface. |
|
|