3Com 5102B-EE Show Bridge Command Attributes, Attribute Description

Table 4-2 describes the SHOW BRIDGE parameters.

Table 4-2. SHOW BRIDGE Command Attributes

Attribute	Description
Ageing Time	The rate at which addresses are aged out
	of the dynamic filtering table.
Dip Configuration	Determines whether the channel
	configuration is read from the dip switch
	settings or memory upon bridge reset.
Current Status	The current state of the Bridge Module.
Protocols Supported	The protocols that the Bridge Module
	supports.
Port 1/2 Channel: Current	The channels to which port 1 and port 2
	of the Bridge Module are currently
	bridging.
Port 1/2 Channel: Memory	The channels to which port 1 and port 2
	of the Bridge Module are configured
	according to the values stored in
	memory. These are the channels which
	will be bridged if the Bridge Module is
	reset and the Dip Configuration
	parameter is disabled.
Port 1/2 Channel: Dip	The channels which port 1 and port 2 are
	configured according to the dip switch
	settings. These are the channels which
	will be bridged if the Bridge Module is
	reset and the Dip Configuration
	parameter is enabled.

4 - 88 ONline Ethernet Bridge Module Installation and Operation Guide