CLEAR COMMUNITY
Use the CLEAR COMMUNITY command to clear an entry from the community table. This command is only available in administrator mode.
Format
CLEAR COMMUNITY {community number}
Parameters
{community number} = 1 - 10 or all
Example
OEBM> clear community 3 | [ENTER] |
Community 3 cleared
Description
The CLEAR COMMUNITY command enables you to clear an entry in the community table.
It is recommended that you use the CLEAR COMMUNITY command in conjunction with the SHOW COMMUNITY command to view the community table before you clear an entry from it.
The community table defines which SNMP stations on the network can access information from the Bridge Module and which station(s) will receive a trap generated from the Bridge Module.
