SET TERMINAL HANGUP

Use the SET TERMINAL HANGUP command to configure how a modem connection is terminated when the LOGOUT command is entered during a modem session.

Format

SET TERMINAL HANGUP {setting}

Parameters

{setting} = disable (default) enable

Example

OEBM> set terminal hangup enable [ENTER]

Terminal parameter change

Description

The SET TERMINAL HANGUP command enables you to configure how a modem connection is terminated when the LOGOUT command is entered during a modem session.

If the HANGUP setting is enabled and you log out of the system, the modem is automatically disconnected, closing down that connection.

The modem is also disconnected if this setting is enabled and you leave your terminal unattended for the amount of time established by the terminal TIMEOUT command. If the HANGUP setting is disabled and you log out of the system, the modem is disconnected only when you explicitly hang up the modem.

Note: If you do not hang up the modem, an unauthorized user may pick up the last login session.

Management Commands 4 - 79

Page 153
Image 153
3Com 5102B-EE installation and operation guide SET Terminal Hangup