SET DEVICE SQE_MODE

Use the SET DEVICE SQE_MODE command to display SQE (heartbeat) failures on the output from the MONITOR and SHOW commands.

Format

SET DEVICE SQE_MODE {parameter}

Parameters

{parameter} = normal (default) ignore

Example

OEBM> set device sqe_mode ignore

[ENTER]

SQE Mode parameter changed

Description

The SET DEVICE SQE_MODE command enables you to display SQE (heartbeat) failures on the output from the MONITOR and SHOW commands.

The default setting is Normal, where SQE failures are displayed. The other SQE_MODE parameter is Ignore. Set SQE_MODE to Ignore if the front panel AUI port is to be used with non-SQE transceivers.

Management Commands 4 - 55

Page 129
Image 129
3Com 5102B-EE installation and operation guide SET Device Sqemode