3Com 5102B-EE installation and operation guide SET Filter Protocolidtable

SET FILTER PROTOCOL_ID_TABLE

Use the SET FILTER PROTOCOL_ID_TABLE command to add a protocol ID to the protocol id table.

Format

SET FILTER PROTOCOL_ID_TABLE {protocol ID}

Parameter

{protocol ID} = protocol ID in hex notation

Example

This example adds the protocol value 08-00, which is the DoD Internet (TCP/IP), to the protocol id table.

OEBM> set filter protocol_id_table 08-00 [ENTER]

Protocol ID added to Protocol ID table

Description

The SET FILTER PROTOCOL_ID_TABLE command enables you to add a protocol ID to the protocol id table.

In conjunction with the SETFILTER MODE command, you can elect to allow or disallow specific Ethernet protocols from being bridged.

4 - 60 ONline Ethernet Bridge Module Installation and Operation Guide