CLEAR FILTER

Use the CLEAR FILTER command to clear an entry from the protocol id table or the static address table. This command is only available in administrator mode.

Format

CLEAR FILTER {parameter} {variable}

Parameters

{parameter} = protocol_id_table {protocol type} static_address_table {MAC address}

Example

OEBM> clear filter

protocol_id_table 0800

[ENTER]

Protocol ID deleted

from

filter

table.

 

 

Do SAVE FILTER and RESET

DEVICE

to use

changes.

Example

OEBM> clear filter static_address_table 03-00-06-07-17-01 [ENTER]

Address deleted from filter table.

Do SAVE FILTER and RESET DEVICE to use changes.

Description

The CLEAR FILTER command enables you to clear entries from the static address table and the protocol id table.

It is recommended that you use the CLEAR FILTER command in conjunction with the SHOW FILTER command to view filter table entries before you clear them.

You must issue the SAVE FILTER and RESET DEVICE commands after modifying the tables for the changes to take effect.

Management Commands 4 - 13

Page 87
Image 87
3Com 5102B-EE installation and operation guide Clear Filter