![](/images/new-backgrounds/1272585/272585431x1.webp)
2Push the drum unit back in until it stops.
o
Note
We recommend you repack the machine on a table or desk.
Put the styrofoam piece marked “FRONT” (1) into the lower carton (3), so that the arrow cutout (4) points toward it. Put the styrofoam piece marked “REAR” into the lower carton so that the arrow cutout (4) points away from it.
n Insert the original orange packing material for the drum unit until as shown in the illustration, and then close the front cover.
200
2
1
3
4
p Using two people, place the machine into the plastic bag and then into the lower carton, matching the “FRONT” piece to the front of the machine as shown in the illustration in Step o.
q As shown in the illustration, fit the two foam pieces marked “FRONT” (4) to the cardboard piece marked “FRONT” (7). Fit the “REAR/L” (5) and “REAR/R” (6) foam pieces to the left and right of the cardboard piece marked “REAR” (8).
5
6
4 8
7