
Chapter 2
Loading documents
You can send a fax, make copies, and scan from the ADF (automatic document feeder) and from the scanner glass.
Using the ADF (automatic document feeder)
The ADF can hold up to 50 pages and feeds each sheet individually. Use standard 20 lb
(80 g/m2) paper and always fan the pages before putting them in the ADF.
CAUTION
DO NOT leave thick documents on the scanner glass. If you do this, the ADF may jam.
DO NOT use paper that is curled, wrinkled, folded, ripped, stapled,
DO NOT use cardboard, newspaper or fabric.
Make sure documents written with ink are completely dry.
Single-sided document
Documents to be faxed must be from 5.8 to
8.5inches (147.3 to 215.9 mm) wide and from 5.8 to 14 inches (147.3 to 356 mm) long, and of a standard weight [20 lb (80 g/m2)].
2-sided document
When you load a
8.5inches (147.3 to 215.9 mm) wide and from
5.8to 11.7 inches (147.3 to 297 mm) long, and of a standard weight [20 lb (80 g/m2)].
20
a Unfold the ADF document output support flap (1) and the ADF support flap (2).
2
1
b
c Place your document, face up top edge first, in the ADF until you feel it touch the feed roller. The LCD will show
ADF Ready.
d Adjust the paper guides to fit the width of your document.
CAUTION
To avoid damaging your machine while using the ADF, DO NOT pull on the document while it is feeding.
To scan