r Put the assembled “FRONT” (1) and “REAR” (2) cardboard pieces in the lower carton at the front and rear of the machine as shown in the illustration. The foam pads should fit closely to the machine to support it.

1

2

s Place the upper carton (1) over the machine and the lower carton. Match the joint holes (2) of the upper carton to the joint holes (3) of the lower carton.

1

2

Troubleshooting and routine maintenance

t Put the two styrofoam pieces for the toner cartridges on the top of the machine. Match the right side of the machine to the “RIGHT” mark on one of the styrofoam pieces, and the left side of the machine to the “LEFT” mark on the other styrofoam piece. Put the toner cartridges in the styrofoam.

u Put the carton tray (1) on the top. Match the front side of the machine to the marks on the carton tray.

Place the waste toner box in the right side of the carton tray.

1

C

201

Page 217
Image 217
Brother MFC-9840CDW manual 201