Brother MFC-9840CDW Sending faxes using multiple settings, Canceling a broadcast in progress

Note

•	The scan profile of the One-Touch,
	Speed-Dial or Group number you chose
	first will be applied to the broadcast.
•	If the fax resolution of the fax number you
	choose first is S.Fine and you enter a
	stored I-FAX number,
	Select Std/Fine will appear on the
	LCD. Press Stop/Exit. Press Resolution
	and choose Standard, Fine or Photo,
	then re-enter the I-FAX number. If you
	want to enter other numbers,

Sending a fax

Additional sending operations

Sending faxes using multiple settings

Before you send a fax, you can change any combination of these settings: contrast, resolution, overseas mode, delayed fax timer, polling transmission, real time transmission or cover page settings.

go back to c.

a Make sure you are in Fax mode .

5

Canceling a broadcast in progress

While broadcasting you can cancel the fax currently being sent or the whole broadcast job.

a Press Menu, 2, 6.

The LCD will display the fax being dialed (for example, #001 0123456789) and the broadcast job number (for example, Broadcast#001):

26.Remaining Jobs a #001 0123456789

bBroadcast#001

Select ab or OK

b Press a or b to choose the job number you want to cancel.

Press OK.

c Press 1 to clear the job number or 2 to exit.

If you chose to only cancel the fax currently being sent in b, the machine will ask you if you want to cancel the broadcast. Press 1 to clear the whole broadcast job or 2 to exit.

d Press Stop/Exit.

After each setting is accepted, the LCD asks if you want to enter more settings:

22.Setup Send Other Settings?

a1.Yes

b2.No Select ab or OK

b Do one of the following:

„To choose more settings, press 1. The LCD returns to the Setup Send menu so you can choose another setting.

„If you have finished choosing settings, press 2 and go to the next step for sending your fax.

37