
Tray selection
You can change the tray use only for the next copy.
a Make sure you are in Copy mode . b Load your document.
c Use the dial pad to enter the number of copies (up to 99).
d Press Tray Select.
e Press d or c to choose the MP>T1, T1>MP, #1(XXX) 1 or MP(XXX) 1. Press OK.
f Press Black Start or Color Start.
Making copies
Out of memory message
If the memory becomes full while you are making copies, the LCD message will guide you through the next step.
If you get an Out of Memory message while scanning a subsequent page, you will have the option to press Black Start or Color Start to copy the pages scanned so far, or to press Stop/Exit to cancel the operation.
To gain extra memory, you can do the following:
Print the faxes that are in the memory. |
(See Printing a fax from the |
memory on page 49.) |
Press Tray Select
MP>T1 or M>T1>T2
T1>MP or T1>T2>M
#1(XXX) 1
#2(XXX) 1
MP(XXX) 1
You can turn off Fax Storage. (See |
Turning off remote fax |
options on page 68.) |
Add optional memory (See Memory |
board on page 112.) |
Note
1XXX is the paper size you set in Menu, 1, 3.
Note
•T2 or #2 appears only if the optional paper tray is installed.
•To change the default setting for Tray Select, see Tray use in copy
mode on page 23.
When you get an Out of Memory message, you may be able to make copies if you first print incoming faxes in the memory to restore the memory to 100%.
12
85