Chapter 12
To enlarge or reduce the next copy follow the instructions below:
a Make sure you are in Copy mode 
. b Load your document.
c Use the dial pad to enter the number of copies (up to 99).
d Press Enlarge/Reduce.
Press c.
e Do one of the following:
Press a or b to choose the enlargement or reduction ratio you want.
Press OK.
Press a or b to choose
Custom(25-400%). Press OK.
Use the dial pad to enter an enlargement or reduction ratio from 25% to 400%. (For example, press 5 3 to enter 53%.)
Press OK.
f Press Black Start or Color Start.
Note
Page Layout Options 2 in 1(P), 2 in 1(L), 4 in 1(P) or 4 in 1(L) are not available with Enlarge/Reduce.
80
Making N in 1 copies (page layout)
You can reduce the amount of paper used when copying by using the N in 1 copy feature. This allows you to copy two or four pages onto one page, which lets you save paper.
Important
Please make sure the paper size is set to
Letter, A4, Legal or Folio.
(P) means Portrait and (L) means Landscape.
You cannot use the Enlarge/Reduce setting with the N in 1 feature.
a Make sure you are in Copy mode 
. b Load your document.
c Use the dial pad to enter the number of copies (up to 99).
d Press N in 1.
e Press a or b to choose 2 in 1 (P), 2 in 1 (L), 4 in 1 (P),
4in 1 (L) or Off(1 in 1). Press OK.
f Press Black Start or Color Start to scan the page.
If you placed the document in the ADF, the machine scans the pages and starts printing.
If you are using the scanner glass, go to g.
g After the machine scans the page, press 1 to scan the next page.
Flatbed Copy:
Next Page?
a1.Yes
b2.No
Select ab or OK
