Brother MFC-9840CDW manual

Models: MFC-9840CDW

1 265
Download 265 pages 3.26 Kb
Page 30
Image 30

Chapter 2

Envelopes

Most envelopes will be suitable for your machine. However, some envelopes will have feed and print-quality problems because of the way they have been made. A suitable envelope should have edges with straight, well-creased folds and the leading edge should not be thicker than two pieces of paper. The envelope should lie flat and not be of baggy or flimsy construction. You should buy quality envelopes from a supplier who understands that you will be using the envelopes in a laser machine.

Envelopes can only be fed from MP tray.

Before you put envelopes in the tray, check the following:

„Envelopes should have a lengthwise sealing flap.

„The sealing flaps should be folded crisply and correctly (irregularly cut or folded envelopes may cause paper jams).

„Envelopes should consist of two layers of paper in the area circled in figure below.

Note

Before you print envelopes, you must ‘fan’ the stack to avoid paper jams and misfeeds.

Before you print a lot of envelopes, test one to make sure that the print results are what you want.

Envelope joints that are sealed by the manufacturer should be secure.

DO NOT put different types of paper in the paper tray at the same time because it may cause paper jams or misfeeds.

For proper printing, you must choose the same paper size from your software application as the paper in the tray.

We recommend that you do not print within 0.6 in. (15 mm) of the edges of envelopes.

See Acceptable paper and other media on page 11.

1

1

1 Feeding direction

14

Page 30
Image 30
Brother MFC-9840CDW manual