d Press a or b to select Public. Press OK.
e Press a or b to select Enable or Disable for Fax Tx. Press OK. After you have set Fax Tx, repeat this step for Fax Rx, Copy(Color), Copy(B&W), Scan and Print.
Press OK.
Note
You can set PC print for only the Public user. When Print is disabled for the Public user, all restricted users cannot use the Print function.

Chapter 4

Setting the password for the administrator

The password you set in these steps is for the administrator. This password is used to set up users and to turn Secure Function Lock on or off. (See Setting up restricted

users on page 31 and Turning Secure Function Lock on on page 31.)

a Press Menu, 1, 9, 2.

19.Security 2.Function Lock

New Passwd:XXXX

Enter & OK Key

b Enter a four-digit number for the password using numbers 0-9, l or #. Press OK.

c Re-enter the password when the LCD shows Verify:.

Press OK.

d Press Stop/Exit.

Setting up the Public user

You can set up the Public user. Public users do not need to enter a password.

Note

You must disable at least one function to turn on Secure Function Lock for Public user.

a Press Menu, 1, 9, 2.

19.Security 2.Function Lock

aLock OffiOn

bSet Password Select ab or OK

b Press a or b to select Setup User. Press OK.

c Enter the administrator password. Press OK.

19.Security

a

Setup User

Public

b

User01

Select ab or OK

f Press Stop/Exit.

30

Page 46
Image 46
Brother MFC-9840CDW manual Setting the password for the administrator, Setting up the Public user