Handling and using special paper

The machine is designed to work well with most types of xerographic and bond paper. However, some paper variables may have an effect on print quality or handling reliability. Always test samples of paper before purchasing to ensure desirable performance. Store paper in its original packaging and keep it sealed. Keep the paper flat and away from moisture, direct sunlight and heat.

Some important guidelines when selecting paper are:

„Your supplier should be informed that the paper or envelopes will be used in a color laser machine.

„Preprinted paper must use inks that can withstand the temperature of the machine’s fusing process (392 degrees Fahrenheit or 200 degrees centigrade for a period of 0.1 seconds).

„If you have selected a cotton bond paper, paper having a rough surface, such as cockle or laid finished paper or paper that is wrinkled or puckered, the paper may exhibit degraded performance.

Loading paper and documents

Types of paper to avoid

CAUTION

 

Some types of paper may not perform well

2

or may cause damage to your machine.

DO NOT use paper:

that is highly textured

that is extremely smooth or shiny

that is curled or warped

1

1

1 0.08 in. (2 mm) or greater

that is coated or has a chemical finish

that is damaged, creased or folded

that exceeds the recommended weight specification in this guide

with tabs and staples

with letterheads using low temperature dyes or thermography

that is multipart or carbonless

that is designed for inkjet printing

If you use any of the types of paper listed above, they may damage your machine. This damage is not covered under any Brother warranty or service agreement.

13

Page 29
Image 29
Brother MFC-9840CDW manual Handling and using special paper, Types of paper to avoid, Mm or greater