Cisco Systems CISCO7201 Gigabit Ethernet RJ-45 Port Pinouts, Pin FE Signal GE Signal, TX DATA+1

Appendix A Specifications

Gigabit Ethernet RJ-45 Port Pinouts

6.For fiber types 50/125 ∝m, NA = 0.20 fiber and 62.5/125 ∝m, NA = 0.275 fiber.

7.For fiber types 50/125 ∝m MMF and 62.5/125 ∝m MMF.

For related documentation, see the following documents:

•Gigabit Interface Converter (GBIC) Module and Small Form-Factor Pluggable (SFP) GBIC Module Installation Information and Specifications

•Cisco SFP Optics for Gigabit Ethernet Applications Data Sheet

•Cisco 1000BASE-T SFP Data Sheet

Gigabit Ethernet RJ-45 Port Pinouts

The Cisco 7201 router has RJ-45 ports for the two 10/100/1000 Gigabit Ethernet/Fast Ethernet/Ethernet connections. In addition, the Cisco 7201 router has an RJ-45 Fast Ethernet Management port. The RJ-45 ports support IEEE 802.3ab (Gigabit Ethernet) and IEEE 802.3u (Fast Ethernet) interfaces compliant with 10BASET, 100BASETX, and 1000BASET specifications.

The RJ-45 ports support standard straight-through and crossover Category 5 UTP cables with RJ-45 connectors. Cisco does not supply Category 5 UTP cables; these cables are available commercially.

Warning To avoid electric shock, do not connect safety extra-low voltage (SELV) circuits to telephone-network voltage (TNV) circuits. LAN ports contain SELV circuits, and WAN ports contain TNV circuits. Some LAN and WAN ports both use RJ-45 connectors. Use caution when connecting cables. Statement 1021

Figure A-1shows an RJ-45 port and connector. Table A-11lists the pinouts and signals for the RJ-45 port.

Figure A-1 RJ-45 Port and Connector

1

12345678

1 57574

RJ-45 connector

			Table A-11	RJ-45 Receptacle Pinouts
			Pin	FE Signal	GE Signal
			1	TX DATA+1	Tx A+
2				TX DATA–	Tx A–
			3	RX DATA+2	Rx B+
4				N/C	Tx C+
5				N/C	Tx C–
		Cisco 7201 Installation and Configuration Guide
	A-6					OL-11364-04