Cisco Systems CISCO7201 manual Router# show environment all, Cpu

Chapter 3 Starting and Configuring the Router

Functional Overview

Following is sample output of the show environment table command for a Cisco 7201 router: Router# show environment table

Sample Point		LowShut		LowCrit	LowWarn	HighWarn	HighCrit	HighShut
NPE Inlet						44C/111F	59C/138F
NPE Outlet						49C/120F	64C/147F
CPU Die						90C/194F	105C/221F
System shutdown for NPE			Inlet is 80C/176F System shutdown for NPE Outlet is 84C/183F
System shutdown for CPU			Die	is 110C/230F
+3.30	V	+2.30		+3.12			+3.47	+4.29
+1.50	V	+1.05		+1.40			+1.56	+1.95
+2.50	V	+1.71		+2.34			+2.61	+3.28
+5.15	V	+3.63		+4.84			+5.46	+6.75
+1.20	V	+0.82		+1.13			+1.28	+1.56
VDD_CPU		+0.89		+1.21			+1.36	+1.71
-11.95		-7.22		-9.63			-14.45	-16.30
VTT		+0.85		+1.17			+1.32	+1.64

Note Temperature ranges and values are subject to change.

The show environment all command displays an extended report that includes temperature readings and voltage readings. The show environment all command also displays a report showing which power supply slots are occupied and which are empty.

Following is sample output of the show environment all command with an AC power supply installed:

Router# show environment all

Power Supplies:

Power Supply 1 is C7201 AC Power Supply. Unit is on.
Power Supply 2 is empty.
Temperature	readings:
NPE	Inlet	measured at 31C/87F
NPE	Outlet	measured at 34C/93F
CPU	Die	measured at 48C/118F

Voltage readings:
+3.30	V	measured at +3.28 V
+1.50	V	measured at +1.50 V
+2.50	V	measured at +2.48 V
+5.15	V	measured at +5.07 V
+1.20	V	measured at +1.20 V
VDD_CPU		measured at +1.27 V
-11.95		measured at -12.04 V
VTT		measured at +1.25 V
Fans:
Fan 1	is believed to be working
Fan 1	RPM is 10070
Fan 2	is believed to be working
Fan 2	RPM is 10600
Fan 3	is believed to be working
Fan 3	RPM is 10600
Fan 4	is believed to be working
Fan 4	RPM is 10600

Envm stats saved 0 time(s) since reload

Cisco 7201 Installation and Configuration Guide

OL-11364-04 3-7