Cisco Systems CISCO7201 manual Faceplate LEDs, Power Up State, LED Label

Chapter 1 Overview

Cisco 7201 Hardware Overview

Faceplate LEDs

The Cisco 7201 router LEDs and behaviors are described in this section.

Figure 1-2 Cisco 7201 Router—Faceplate LEDs

Cisco 7201

RJ45 EN

GE

1

2

LINK/ACTV
SFP	RJ45	EN

GE

1

2

TX	LINK/ACTV		LINK/ACTV
	SFP	RX
			SFP
			GE 0/2

1

1

		CONSOLE
TX	LINK/ACTV
	SFP	RX
		MNGMNT USE
			ONLY
	GE 0/3	AUX
		FE 0/0	FE	0

3

4

COMPACT FLASH

5

6

ALARM

PWR OK

STATUS

CF

ACTV

8 7

170859

						In the Power Up State
	No.	LED Label		LED	Color—Activity		Behavior Description
1		LINK/ACTV		SFP and RJ-45 ports	Solid green		Link with no activity
		(Link/Active)
					Flashing green		Link with activity
		(0/0, 0/1, 0/2, 0/3)
					Off		No link
2		EN (Enable) (0/0, 0/1)		RJ-45 ports only	Solid green		RJ-45 port is selected.
					Off		SFP port is selected.
3		USB		USB port	Flashing green		Activity
					Off		No activity
4		FE 0/0		Fast Ethernet Management	Solid green		Link with no activity
				port
					Flashing green		Link with activity
					Off		No link
5		ALARM		Alarm port	Solid red		On if Cisco IOS has crashed, and a
							reset has happened, and remains on
							until Cisco IOS is reloaded.
					Off		Off, the system is normal.
6		PWR OK		Power	Solid green		The power-on is successful and the
							system is attempting to boot software,
							or has booted software.
					Off		Off, the router is in standby mode.
7		STATUS		System status	Solid green		Cisco IOS has successfully booted.
					Blinking amber		ROMmon is loading.
					Blinking green		Cisco IOS is loading.
8		CF ACTV		CompactFlash Disk	Flashing green		Activity
					Off		No activity
			Cisco 7201 Installation and Configuration Guide
	1-4						OL-11364-04