Cisco Systems CISCO7201 manual RX Data, Rx B, Rx D+, Router Hub

Appendix A Specifications

Gigabit Ethernet RJ-45 Port Pinouts

Table A-11	RJ-45 Receptacle Pinouts (continued)
Pin	FE Signal	GE Signal
6	RX DATA–	Rx B–
7	N/C	Rx D+
8	N/C	Rx D–

1.TX DATA = Transmit Data

2.RX DATA = Receive Data

Note With reference to the RJ-45 pinouts in Table A-11, proper common-mode line terminations should be used for the unused Category 5 UTP cable pairs 4/5 and 7/8. Common-mode line termination reduces electromagnetic interference (EMI).

Depending on your RJ-45 interface cabling requirements, use the pinouts shown in Figure A-2and Figure A-3for Gigabit Ethernet straight-through and crossover twisted-pair cable connections. Use Figure A-4for Ethernet/Fast Ethernet straight-through and crossover twisted-pair cable connections.

Figure A-2

1

1TPO+

2TPO-

3TP1+

6TP1-

4TP2+

5TP2-

7TP3+

8TP3-

Four Twisted-Pair Straight-Through Cable Schematics for 10/100/1000 and 1000BASE-T SFP Module Ports

	2
1	TP1+
2	TP1-
3	TPO+
6	TPO-
4	TP3+
5	TP3-	129086
7	TP2+
8	TP2-

1

Router

2

Hub

Cisco 7201 Installation and Configuration Guide

OL-11364-04 A-7