Cisco Systems CISCO7201 manual Attaching the Grounding Lug

Chapter 2 Installing the Cisco 7201 Router

Attaching a Chassis Ground Connection

Use the following procedure to attach the grounding lug to the chassis ground connector on your router chassis:

Step 1 Use the wire stripper to strip one end of the 6-AWG wire approximately 0.75 inches (19.05 mm). Step 2 Insert the 6-AWG wire into the wire receptacle on the grounding lug.

Step 3 Use the crimping tool to carefully crimp the wire receptacle around the wire; this step is required to ensure a proper mechanical connection.

Figure 2-9 Attaching the Grounding Lug

PWR SLOT 1 OK PWR SLOT 2 OK PWR SLOT 1
PWR SLOT 2	230031
1

1

Grounding lug

Step 4 Attach the grounding lug with the wire on the left to avoid having the grounding wire overlapping the power supply. See Figure 2-9.

Figure 2-10 Attaching a Grounding Lug to the Chassis Ground Connector

3

42

50536

1

2

		1
Chassis ground connector			Screws
	3
Grounding lug	4		Wire

Step 5 Locate the chassis ground connector on the rear of your router chassis.

Step 6 Insert the two screws through the holes in the grounding lug.

	Cisco 7201 Installation and Configuration Guide
OL-11364-04		2-13