Setup Guide

Embedded SCSI Controller

SCSI

IDE CD-ROM Controller

Auto

Diskette Controller

Auto

USB Controller

On without BIOS support

Embedded GB NIC 1 + 2

On

NIC 1

PXE

Disabled

NIC 1

PXE

Disabled

Serial Port 1

COM1

16Press Esc.

You see the Main menu again.

17Use the arrow keys to select Console Redirection and press Enter.

18Verify that the options are set as follows. Do not change options that are not listed here. Use the arrow keys to make changes.

Console Redirection

Off

Note: All other BIOS settings do not affect Network Discovery and can be set as you prefer (including asset tags, keyboard and security preferences, etc.).

For the Dell 1650

To set the BIOS boot sequence

In the setup, use the up and down keys to select the items and the right and left keys to configure the options.

After you power the server on, wait until the display shows Press F2 for Configuration/Setup.

1Press F2.

You see the Main menu.

2In the main menu, make sure the Item “OS Install Mode” is set to “Off.”

3Use the arrow keys to select Boot Sequence and press Enter.

4Press Enter again.

Set the BIOS boot sequence 51

Page 51
Image 51
Dell DPND-523-EN12 manual Nic Pxe