Network Discovery

Ethernet port 2 on the HP DL360/DL380:

Use Ethernet port 2 for the crossover cable

Step 4: Check the connection between the two appliances

To check the connection between the two appliances

1On the new appliance, click Administration > Backup and restore > Test external backup and restore.

2Select “appliance.”

3Click Test.

Step 5: Remove the old appliance from the network

„Disconnect the network cable from the old appliance.

Step 6: Connect the new appliance to the network

„Follow the procedure Connect the appliance to the network on page 60 in Chapter 5, Install and Start Network Discovery.

Step 7: Log in to the new appliance

„Enter the URL for your appliance and log in with the following info:

User Name: admin

Password: password

142 Backup and Restore

Page 142
Image 142
Dell DPND-523-EN12 manual Remove the old appliance from the network