![](/images/new-backgrounds/1147561/147561173x1.webp)
Setup Guide
3Enter the IPv4 address of the server with which you want to synchronize time.
4Click Synchronize Time.
The time is now the same as the server you synchronized with, but the times may diverge later.
Enter an NTP server to synchronize the time (continually)
Entering an NTP server is optional.
An NTP (Network Time Protocol) server is a server that keeps track of and reports the exact time. Network Discovery can synchronize its system time with the time reported by the NTP server.
To enter the NTP server
1Click Administration > Appliance management > NTP server.
2Enter the Host name or IPv4 address.
3Click Change.
The time is now the same as the time on the NTP server and it will stay the same.
Set the system time 87