90 | Appliance Management
Network Discovery
To enable or disable the UPS warning
1Click Administration > System preferences > Display warnings.
2For UPS warnings enabled, click Yes or click No.
3Click Change.
Disabling modem warnings
Network Discovery generates warnings if it does not detect an internal modem.
If you have chosen to receive customer support through the Internet, over a
Virtual Private Network or over a Remote Access Server, you can disable this
modem warning.
To enable or disable the modem warning
1Click Administration > System preferences > Display warnings.
2For Modem warnings enabled, click Yes or click No.
3Click Change.
Disabling backup warnings
We strongly recommend that you configure a backup of your Network
Discovery data. For that reason, if Network Discovery detects that you have
configured a backup and detects that it has not successfully completed a
backup within the past 25 hours, Network Discovery will create a warning
condition for Appliance Health (visible at the bottom of the Health Panel).
If you have not configured a backup, you will not receive a warning. The default
is Yes. You can turn this warning off.
To enable or disable the backup warning
1Click Administration > System preferences > Display warnings
2For Backup warnings enabled, click Yes or click No.
3Click Change.