Setup Guide
Step 1: Setup your new Peregrine appliance
Perform the procedures as detailed in this Setup Guide, Chapter 5, Install and Start Network Discovery. If your new appliance will have the same IP address as the old appliance, do not connect the new appliance to the network yet. You will do that later in this process.
Step 2: On your old appliance, do an internal backup
Click Administration > Backup and restore > Run internal backup now.
If you cannot perform this step, you will restore data from the last time the old appliance did an automatic internal backup (which occurs daily after midnight).
Note: This action will also initiate an external backup if one has been configured.
Restoring your data 139
