Network Discovery
Assign a system name, contact, and location
“System name” is the name of the network or part of the network that Network Discovery is currently managing. The system name is displayed in the Toolbar banner.
“System contact” is the Network Discovery Administrator.
“System location” is the physical location of the Peregrine appliance.
These are standard SNMP entries; assign them according to your corporate policy.
To assign a system name, contact and location
1Click Administration > Appliance management > Appliance system variables.
2Enter the system name.
The system name can be a maximum of 250 characters long (including spaces)
3Enter the system contact.
4Enter the system location.
5Click Change.
Note: The new system name does not appear in Toolbar banner until you close and reopen the Toolbar.
