Setup Guide

Warning: Peregrine Systems strongly recommends that the Peregrine appliance be placed on the inside of the corporate firewall.

The port that allows the Peregrine appliance access to the network must be Ethernet. Network Discovery automatically detects what speed the Ethernet port is and whether it is full- or half-duplex. Network Discovery works best if the port is SNMP managed.

Note: Network Discovery’s network interface card is configured to “auto negotiate.” Make sure the switch to which you are connecting has its interface set to “auto negotiate.”

IBM xSeries 335 Peregrine appliance

On the IBM xSeries 335 Peregrine appliance, connect the top-of-the-network device to the Peregrine appliance’s Ethernet port 1, the bottom right port.

Use Ethernet port 1

Connect the appliance to the network 61

Page 61
Image 61
Dell DPND-523-EN12 manual IBM xSeries 335 Peregrine appliance