
Network Discovery
4Press Enter again.
You return to the Configuration/Setup Utility main menu. If you have an IBM xSeries 335, continue with all of the steps. If you have an IBM xSeries 330, go to step 8.
5Use the arrow keys to select Start Options and press Enter.
6Press Enter again.
7Verify that the options are set as follows. Do not change options that are not listed here. Use the arrow keys to make changes.
Planar Ethernet PXE/DHCP | Disabled |
Disketteless Operation | Enabled |
Displayless Operation | Enabled |
Keyboardless Operation | Enabled |
USB Legacy | Enabled |
Boot on Post/BIOS Error | Enabled |
8Press Esc.
You see the Configuration/Setup Utility main menu again.
9Use the arrow keys to select Start Options and press Enter.
10Use the arrow keys to select Startup Sequence Options (IBM xSeries 335) or Startup Sequence (IBM xSeries 330) and press Enter.
11Verify that the options are set as follows. Do not change options that are not listed here. Use the arrow keys to make changes.
Wake On LAN Disabled
First Startup DriveCD ROM
Second Startup DriveHard Disk 0
Third Startup DriveDiskette Drive 0
48 Install and Start Network Discovery