Operation 3. AUTO Mode
Enable execution in main menu
Normally, the followings are set in the program mode after the password is entered.
-Project Backup / Restore
-System Backup / Restore
-File Import / Export
Items that are enabled for execution are added to the menu in the [Backup] screen. (See “Operation 3.7 Backup / Restore.”)
Follow the procedure below to enable execution in the main menu.
(1)In the [Configuration] screen, move the cursor to [1 Backup Screen], and press the <OK> key. The following screen appears.
To change an item:
Move the cursor to the left column.
To change item settings:
Move the cursor to the right column.
(2)Change the setting of each item, and press the <OK> key to save the setting. Yes : Enabled
No : Not enabled
Pressing the <F1> key returns the setting to its default. The screen in step (1) shows the defaults.
Press the <OK> key and the Controller reboots.
3.6.11Change Display Language
(1)In the [Program Mode] screen, move the cursor to the last line, and press the <↓> key. The following screen appears.
Move the cursor to [0 Language...] and press the <OK> key.
TP1 Rev.5 | 93 |
