Operation 2. TEACH Mode
2.4Arm/Tool/Local/ECP
This section indicates settings in the [Arm/Tool/Local/ECP] screen.
Press the <F5> or <F6> key in the [Jog&Teach] screen.
The following screen appears.
When a value has been changed, press the <Enter> key to apply the value, and be sure to press the <OK> key to save the settings.
2.4.1Changing Arm No.
(1)Press the <F1> key and move the cursor to [Arm].
(2)Set the arm number.
2.4.2Changing Tool No.
(1)Press the <F2> key and move the cursor to [Tool].
(2)Set the tool number.
2.4.3Changing Local No.
(1)Press the <F3> key and move the cursor to [Local].
(2)Set the local number.
2.4.4Changing ECP No.
(1)Press the <F4> key and move the cursor to [ECP].
(2)Set the ECP No.
38 | TP1 Rev.5 |
