Operation 2. TEACH Mode
2.7.3Setting Righty / Lefty (E2 Series / G Sereis)
(1)In the [Calibration] screen, move the cursor to “Righty/Lefty”, and press the <OK> key.
(2)The following screen appears. Select one of the point data in the accessible area that is easy to verify the accuracy for both right and left arm orientations using the <↑> and <↓> keys and press the <Enter> key.
Press the <F2>key.
(3)The following screen appears. Press the <Motor> key to turn ON the motor. Press the <F2> key.
TP1 Rev.5 | 57 |
