Operation 4. Password Setup
4.Password Setup
Setup a password to limit operators for the following menu.
TEACH mode | |
AUTO mode | [Main |
Follow the procedure below to set the password.
(1)Turn ON the Controller.
(2)Double click the <EPSON RC+ 5.0> icon on the desktop.
(3)Select EPSON RC+5.0
(4)Click the <Change> button at “TP Program Mode Password.”
(5)The following dialog appears.
Enter a password with 1 to 16 numerals from the keyboard and click the <OK> button.
NOTE More than one letter is assigned to each key on the TP. If characters other than ) numerals are used for the password, the password input will be complicated.
(6) Click the <Apply> button and reboot the Controller.
TP1 Rev.5 | 99 |
