Functions & Installation 1. Safety
1.Safety
1.1Conventions
Important safety considerations are indicated throughout the manual by the following symbols. Be sure to read the descriptions shown with each symbol.
| This symbol indicates that a danger of possible serious injury |
| or death exists if the associated instructions are not followed |
WARNING | properly. |
|
|
| This symbol indicates that a danger of possible harm to people |
| caused by electric shock exists if the associated instructions are |
WARNING | not followed properly. |
|
|
| This symbol indicates that a danger of possible harm to people |
| or physical damage to equipment and facilities exists if the |
CAUTION | associated instructions are not followed properly. |
|
|
1.2Safety Precautions
For details of Safety, refer to Safety Chapter in the User’s Guide. Please read and understand the chapter before using the robot system.
WARNING
Only trained personnel should design and install the robot system. Trained personnel are defined as those who have taken robot system training and maintenance training classes held by the manufacturer, dealer, or local representative company, or those who understand the manuals thoroughly and have the same knowledge and skill level as those who have completed the training courses.
Only authorized personnel who have taken the safety training should be allowed to execute teaching or calibration of the robot system.
The safety training is the program for industrial robot operator that follows the laws and regulations of each nation. The personnel who have taken the safety training acquire knowledge of industrial robots (operations, teaching, etc.).
The personnel who have completed the robot
TP1 Rev.5 | 3 |
