Operation 1. Teaching Procedure

1.2Teaching

Apply the Robot position to the specified point number.

(1)Specify the point number by changing the value in the [Point] using the <↑> and <↓> keys.

[Label] display changes by changing the point number.

(2)Press the <Teach> key.

(3)The following screen appears.

When the point number is already used, the following screen appears.

(4)Press the <OK> key to assign the robot position.

(5)Press the <Save Points> key to display the following screen. Enter the file name and press the <Enter> key.

(6) Press the <OK> key to save the file.

28

TP1 Rev.5

Page 38
Image 38
Epson TP1 manual Teaching