Disk Drive

Note
When the disk drive is replaced, all fonts and
macros must be re-loaded.
1The Disk Drive is mounted on the upper
front corner of the Formatter PCA under
MIO card No. 1 (if installed).
2With the printer OFF and unplugged,
loosen (2) captive screws and remove the
Formatter Assembly. Remove MIO card
No. 1, if installed.
3Place the Formatter Assembly face down
on a level surface. There are (2) small
latches and (2) large latches. Push the (2)
small latches through the holes to unlatch
the drive.
4Flip the Formatter Assembly over,
unlatch the ribbon cable and remove the
drive.
6-8 Removal and Replacement