Pickup Assembly

1Open the paper tray to the stops.
2Remove the Transfer Assembly (see Figure 6-64).
3Remove the right cover (see Figure 6-55) and the Back Cover (see
Figure 6-53).
4Unplug (1) connector (Figure 6-59, callout 1) from the front of the Pickup
Assembly.
5Unplug (2) in-line connectors (Figure 6-59, callout 2).
6Unplug (1) connector (Figure 6-59, callout 3) from the side of the assembly.
7Free the cables from their retaining clips.
8Remove (4) screws, CH108 (Figure 6-59, callout 4).
9Slide the assembly straight out of the chassis.
To Reinstall:
Make sure that the side connector (Figure 6-59, callout 3) is replaced.
Tray 4, Pickup Assembly
Figure 6-59
6Removal and
Replacement
Removal and Replacement 6-73