Front Cover

1Open all access doors and remove the Duplex Unit if installed.
2Open front access door and remove (3) screws, CH102 (Figure 6-5, callout 1).
3Open the Diverter Access Door and release the two plastic retaining tabs
inside the Duplex Unit cavity (Figure 6-6, callout 2).
Caution Be careful, the plastic upper retaining tabs will break off if the cover is
tilted too far out.
4Carefully pull the bottom of the cover away from the chassis while moving it
to the right to release the retaining tab (Figure 6-5, callout 3).
5Carefully tilt the bottom edge of the cover away from the chassis to release
the upper retaining tabs.
6-20 Removal and Replacement