Message Error
Log
Category/
Message
Description Recommended
Action
66.1.1 DEVICE ERROR
CYCLE POWER Service
Message
66.01.01
Feed Motor malfunction. The 2000-Sheet
Input Feeder Main Drive Motor provides all
"drive" capabilities for feedi ng paper in Tray
4.
To see if the 2000-Sheet Main
Motor is functioning, open the
vertical transfer door. Then open
and close Tray 4. Override the
vertical transfer door open
photosensor (PS35). (Refer to
Figure 7-15.) See if the white
drive roller on the lower
right-hand side of the printer
rotates. If it does not rotate,
check the cable connections from
the 2000-Sheet Feeder to the
Main Drive Assembl y (callout 1,
Figure 6-56), Pickup Assembly
(callouts 2 and 3, Figure 6-59),
Controller PCA (callout 1, Figure
6-58), Power Supply (callout 1,
Figure 6-61). Replace the Pickup
Assembly. Replace the Controller
PCA. Replace the 2000-Sheet
Feeder’s power supply.
66.1.2 DEVICE ERROR
CYCLE POWER Service
Message
66.01.02
Lifter malfunction. Under normal operating
conditions, when Tray 4 is closed, the Tray 4
paper stack lifts until the paper is directly
beneath Tray 4’s feed rol lers . Photos ens or
flag PS34, the Paper Surface photosensor
determines when the paper stack is lifted to
its feed position (refer to Figure 7-23).
See the recommended actions for
Message Tray 4 Empty.
66.1.3 DEVICE ERROR
CYCLE POWER Service
Message
66.01.03
Both Feed Motor and Lifter malfunction. See recommended actions for
Error Log Messages 66.01.01
and 66.01.02.
Table 7-5 Printer Control Panel Messages (continued)
7
Troubleshooting