To Reinstall Disk Drive

1Locate the four disk drive mounting holes
on the Formatter Assembly. Remove the
drive from the packaging and align with
to the mounting holes.
2Tilt the drive up and insert latch A
(nearest the board edge) in the hole, then
slide the drive toward the center of the
formatter board.
3Push down firmly on the cover of the disk
drive nearest the cable until the latch (B)
clicks into position.
4Carefully align the cable to connector J3
on the Formatter board and press firmly
into place.
5Reinstall the Formatter Assembly,
reconnect the cables, and print a Disk
Directory Page from the Control Panel
Test Menu to verify proper installation.
(A)
(B)
6Removal and
Replacement
Removal and Replacement 6-9