Covers

There are five cover assemblies in this printer:
•AC Access Cover, located at the left rear of the printer.
•Back Cover, provides access to the HVPS, DC Controller, LVPS, and Main
Motor.
•Front Cover, including front access door.
•Left Lower Cover, located below the Diverter Access Door.
•Top Cover, provides access to the Face-Down Delivery Unit and
Laser/Scanner Assembly.

AC Access Cover

1Remove the Formatter PCA.
2Remove (3) screws, CH102 (Figure 6-3, callout 1).
To Reinstall:
1Tuck the panel edge (Figure 6-3, callout 2) inside the back cover (if
installed).
2Be sure that the three alignment tabs (Figure 6-3, callout 3) are inserted
into their slots before replacing the screws.
AC Access Cover
Figure 6-3
6-18 Removal and Replacement