Control Panel Menus
Press [Menus] to cycle through the control panel menus. Each menu is
described in a separate table in this section. Table 3- 5 provides a map of all
the menus and their associated items. Menu items are displayed only if
their associated option is installed, or function is activated.
All menus and their associated items are accessible when the printer is on line.
In a menu mode, if no keys are pressed for approximately 30 seconds, the
system will automatically return to the top level and display:
•READY, if the printer was on line.
•OFFLINE, if the printer was off line.
•An existing error or service message.
To select a menu item:
1Press [Menus] repeatedly until the desired menu appears.
2Press [Items] repeatedly until the desired item appears.
3Press [+] repeatedly (or hold down [+] to scroll) until the desired setting
appears.
4Press [Select] to save the selection. An asterisk appears next to the
selection, indicating that it is now the default.
5Press [Menus] or [On Line] to exit the menus.
3-10 Operating Overview